|
Irwin 3111002 Metal and Wood Door Lock Installation Kit | 
| Brand: Irwin
Category: Home Improvement
List Price: $26.78
Buy New: $15.08
You Save: $11.70 (44%)
Rating:  3 reviews
Sales Rank: 10274
Media: Tools & Hardware
Shipping Weight (lbs): 2.5
Dimensions (in): 9.2 x 5.8 x 1
MPN: 3111002
Model: 3111002
UPC: 038548037547
EAN: 0038548037547
ASIN: B0009R1EW2
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Complete door lock installation kit | | • | Simple 3-step system for installation on all interior and exterior doors | | • | Self-centering jig fits common door widths | | • | Adjust jig to fit 2-3/8-inch or 2-3/4-inch backsets | | • | Includes a bonus nylon storage bag |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Amazon.com Product Description
The Irwin Metal and Wood Door Lock Installation Kit includes a double-sided jig, two bi-metal hole saws, a 3/8-inch mandrel, a bolt plate template, custom router bit, hinge plate template, and nylon bag to store all the parts. It fits all interior and exterior doors and lets you install locks in three simple steps. The self-centering jig fits common door widths and can be adjusted to fit 2-3/8 inch or 2-3/4 inch backsets.
Product Description
Bi-Metal Door Lock Installation Kit For Metal & Wood Doors, Completes Installation In 3 Easy Steps, Kit Includes: 2 Bi-Metal Hole Saws With Arbors, A 2 Sided Self Centering Jig That Will Accommodate Both 2-3/8" Backset & 2-3/4" Backset, A Butt Hinge Template, A Router Guide & Router Bit For The Face Plate, 1 Piece Per Card.
|
| Customer Reviews:
 useless November 30, 2008
I almost ruined my door using this jig. It is very unstable and doesn't allow you to see if your hole saw is tilted or straight. The hole saws are also very quick to dull,(about 5 seconds). I have had much better results with the tape on templates. Save your money
 Good tool for the money November 3, 2007
0 out of 1 found this review helpful
I had two doors to hang and couldn't justify the cost of a professional grade tool for the job. I bought one of these based upon postitive past experience with Irwin tools.
1. The hole guide works well for positioning the hole saws but is not strong enough to hold them on track if the operator doesn't start and maintain the saw perpendicular to the door face - you must be precise. It was easy to position and secure on the door. The hole saws and mandrel are of good quality and will outlast the rest of the tool.
2. The latch plate template and included 'router bit' work pretty well. I was able to cut nice looking, properly sized mortises with it. The instructions suggest turning the bit with a drill but I found that it cuts very slowly due to the low RPM. I chucked it in a rotary tool and that sped up the cutting considerably. The guide bearing on the bit is cheap and I would not expect it to last through many jobs.
3. The included hinge mortise template is sized for 3-1/2" hinges only. It is better than nothing if you haven't mortised hinges before but if you have a sharp chisel and a steady hand it adds no value to the kit. It would have been better if Irwin had included a template for the strike plate.
Bottom line: I you just have a couple of doors to install and work carefully, this is a good tool. It is not designed for production useage.
Plastic jig doesn't do the job January 23, 2007
3 out of 5 found this review helpful
The plastic jig is way too wobbly for this kit to work well. Your best bet is to buy an installation kit with a metal jig. I ended up throwing this one in the trash.
|
|
|
Not sure you are seeing the best price? Compare at PriceRunner
powered by full speed | |
