|
| 
| Brand: Jet
Category: Home Improvement
List Price: $1.90
Buy New: $0.78
You Save: $1.12 (59%)
Rating:  38 reviews
Sales Rank: 123
Media: Tools & Hardware
Shipping Weight (lbs): 0.1
Dimensions (in): 4.1 x 3.8 x 3.2
Model: JW1044
UPC: 662755123757
EAN: 0662755123757
ASIN: B00005A1IQ
Availability: Usually ships in 1-2 business days
Shipping: Expedited shipping available
Condition: BRAND NEW FACTORY SELAED, SUPER FAST SHIPPING
|
| Customer Reviews:
 Did not fit correctly. March 31, 2008
0 out of 1 found this review helpful
I bought this adapter to reduce the 4 inch opening on my delta planner but it is the exact size as the opening on the planner. I though the purpose of a reducer was to fit 4 inch openings without another adapter. I had to buy a 4 inch to 4 inch coupling to make this work.
waist of money January 12, 2008
1 out of 5 found this review helpful
you would think this fitting is all you need to be able to use a shop vac,
it wont work; unless you also buy a 4" hose and other fittings?
dont waist your money, (there are other fitting out there)
 Make sure this is what you want January 2, 2008
4 out of 4 found this review helpful
This item works as advertised. I bought this when I was setting up my dust collection system and wanted to connect it to my spindle sander (which takes a shop-vac type of connector). I was not careful when I read the dimensions of this reducer. This will not work for such purpose. It will work if you want to connect your shop-vac to it and then connect the other end to the 4" connector of a machine. The problem is that a shop-vac is 2 1/4" and not 2 1/2. There is a different adaptor you could use for that.
Not for connecting shop vacs December 31, 2007
1 out of 1 found this review helpful
I purchased this with a dust collection hood for my planer. The hood has a 4" port. I thought that I could plug my shop vac hose into this adapter and then plug the adapter into the hood. My mistake! This will allow you to adapt a 4" hose to a 2.5" hose, but I had to tape the adapter to the hood as both ends of the adapter are female.
Item is not as shown in the pictures December 8, 2007
The picture seems to show an adapter with a tapered transition from the large to the small dimension. In fact they have a 90 degree step making them not suitable if you are using a shop vac on the small end to exhaust a tool with a large diameter output. If you want to connect a smaller vac hose to a large dimension shop system they would be OK. I just threw them away.
|
|
|
Not sure you are seeing the best price? Compare at PriceRunner
powered by full speed | |
