|
Irwin Marples M444/S4 4-Piece Blue Chip Bevel Edge Woodworking Chisel Set | 
| Brand: Irwin
Category: Home Improvement
List Price: $41.85
Buy New: $36.56
You Save: $5.29 (13%)
Rating:  26 reviews
Sales Rank: 9208
Media: Tools & Hardware
Fragile: No
Shipping Weight (lbs): 2
Dimensions (in): 14.7 x 7.6 x 1.3
MPN: 734442197522
Model: M444/S4
UPC: 734442197522
EAN: 0734442197522
ASIN: B0000457K2
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Professional-grade set of 4 bevel edge woodworking chisels | | • | Longer blades and handles create more leverage | | • | Made from durable solid-forged high-carbon steel | | • | Designed for hand or mallet work | | • | Full lifetime warranty |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
For the professional woodworker. The slightly squared special polyproplyne handle gives a good, comfortable grip on the hard-working chisel. And there is less danger of the chisel twisting and slipping during use. Bevel edge set includes 1/4", 1/2", 3/4" & 1".
Amazon.com Product Description
The Irwin Marples M444/S4 4-Piece Blue Chip Bevel Edge Woodworking Chisel Set includes 1/4-inch, 1/2-inch, 3/4-inch, and 1-inch bevel edges, all of which are made from solid-forged high-carbon steel for maximum edge retention. They use a longer blade and handle to give you added leverage, and are ideal for hand or mallet work. Irwin backs these tools with a lifetime warranty.
|
| Customer Reviews: Read 21 more reviews...
 Great Value for Money March 16, 2007
1 out of 1 found this review helpful
For an affordable, entry-level chisel, you can hardly do better than the Irwin Blue Chip chisels. The poly handles are durable enough to withstand hammer blows, though you should get in the habit of hitting chisels only with a wood or rawhide mallet. They take an edge well, and the edge holds up for a reasonably long time in soft woods--working hard woods, the chisels will require more frequent sharpening. However, they will require some work out of the box. The backs may need a little flattening on a coarse whetstone, or on sandpaper glued to a hard, flat surface (like plate glass or a belt sander paten), and as with all new chisels, they will require sharpening before use. These chisels are pretty comfortable to use, though the handle is a little big for the ", making that size a little awkward to use. (One reviewer below mentioned that there was a significant gap between the handle and blade---that is probably a manufacturing defect. I would have immediately returned the defective chisel for a replacement!) My advice is to get the set of 4, which includes the most often used sizes. You can add others singly as you need them, or upgrade to a better set later. But for the price (and Amazon usually has the best price), it's hard to beat these chisels.
 Poor fit and finish, ok for crude work January 13, 2007
4 out of 4 found this review helpful
I bought these thinking I'd use them as an upgrade to my old stanley 3 chisel set. I would say these are not an upgrade. These chisels are probably fine, probably good chisels. But... the fit and finish of the handles and the handles to the blades is terrible. There is a significant gap where the plastic handle is molded around the shank. The flash on the handle is some of the worse I've seen. I had to come around with a knife and clean up the ridge of flash and stump of the sprue. The factory edge is nothing to be impressed about. The edges were rolled on two of the four. I realize these are cheap chisels, and probably fine but they do not convey a feeling of quality. I am comparing these to my Stanley and Crown sets, the Stanleys were cheaper, the Crowns more expensive.
a solid tool at an attractive price. March 18, 2006
1 out of 1 found this review helpful
More for the handy everyman than the fine furniture maker, these chisels nonetheless merit recommendation because of their utility and very reasonable pricing. The blades cut through red oak for a door jamb installation with no noticeable wear. The range of sizes only adds to the overall value
Even if you have a top flight set of chisels, the Irwins would be worthwhile for use in more mundane jobs.
 I may never get these flat! January 30, 2006
5 out of 6 found this review helpful
Every chisel in this price range will probably take some work but these are taking a lot more than I bargained for. I've lapped and honed the backs of these chisels for at least two hours trying to get them flat. I can live with them now but there are still several spots on all four of them that I didn't get true; The worst spot on the 1" was right on the tip. Based on Marples pre-Irwin reputation, I'm hoping these chisels will redeem themselves enough with use to justify the price, but they definitely cost more than I was expecting. If you equate your time to money, add at least two hours worth to the price listed.
Edit to add: After posting that review I cut a small notch in some plastic with the 1/4" using light taps from a wooden mallet - Believe it or not, it chipped. Back to the stone...
 Excellent Chisel for the money December 7, 2005
2 out of 2 found this review helpful
I have owned a set of these for about 2 years now and haven't even needed to sharpen them. I have used them for a number of strike and shave operations and they are holding the factory edge amazingly well. I would highly suggest getting a set.
|
|
|
Not sure you are seeing the best price? Compare at PriceRunner
powered by full speed | |
